| Product Specification |
Description |
| Size |
25.5cm x 7.6cm x 6.4cm |
| Weight |
738g |
| Sensors |
Photolonization sensor with standard 10.6eV lamp |
| Battery |
12 hours of operation on alkaline battery adaptor (12 hours with lithium-ion battery pack) |
| Display Graphic |
4 lines, 28 x 43mm, with LED back light |
| Keypad |
1 operation and 2 programming keys, 1 flashlight on/off |
| Direct Readout |
Instantaneous reading of: |
| |
VOCs as ppm by volume |
| |
High and low values |
| |
Date and time |
| Alarms |
95dB buzzer (at 30cm) and flashin red LED to indicate exceeded preset limits |
| |
High: 3 Beeps and flashes per second |
| |
Low: 2 beeps and flashes per second |
| |
Alarm latching with manuel override or automatic reset |
| |
Additional diagnostic alarm and dsplay message for low battery and pump stall
|
| IP Rating |
IP-65 |
| Calibration |
Two-point calibration for zero and span |
| Sampling Pump |
Internal, integrated flow rate at 400cc/min |
| |
Sample from 30m horizontally and vertically |
| Low Flow Alarm |
Auto shut-off pump at low-flow condition |
| Operating Tempreature |
-20° to 50°C |
| Humidity |
0 to 95% relative humidity (non-condensing) |
| Warranty |
3 year for 10.6 eV lamp, 1 year for pump, battery and instrument |