| |
Air Products > SIDEPAK Personal Sampling Pump
You've been there before. You grab a sample pump fresh off the charger, set it up, and at the end of the day, you find out that the battery didn't last and your whole day is wasted!
Never again, if you use the SIDEPAK Personal Sampling Pumps with the Smart Battery Management System. The 3 and 5 L/min SIDEPAK Personal Sampling Pumps weigh as little as 0.45kg (16oz). All models offer TSI's Smart Battery Management System with long-running NiMH or alkaline battery packs and provides precise run time information in minutes remaining.
All SIDEPAK pumps are intrinsically safe and ideal for the sampling of aerosols, gases and vapors in hazardous environments.
Advanced personal sampling pump models feature precision volumetric flow control, continuous measurement and logging of volumetric flow rate for accurate sample volume information, fully programmable multi-mode operation and convenient internal low-flow adjustment.
Accessories include:
- Single and multiple sorbent tube kits.
- Filter cassette kits.
- Cyclone kit.
- Carry cases.
-
Filter Cassette
-
Use the 37 mm diameter filter cassette and filter papers to collect dust samples for later analysis. The cassette comes with a lapel clip to hold the cassette close to your mouth and nose. Papers sold separately.
-
Cyclone Kit
-
Used to discriminate between the respirable fraction and the other portions of the ambient aerosol. It is attached with a lapel clip to the worker near their head to sample the air they breathe. The cyclone is a Dorr-Oliver type and is designed to separate out particles smaller then 4 microns. Particles larger then 4 microns get trapped in the cyclone, those smaller than 4 microns pass through and are captured on the filter paper in the cassette holder on the end of the cyclone.
-
Sorbent Tube Holder
-
Use the sorbent tube holder with sorbent tubes to measure specific gas concentrations. Single, double and triple tube holders are available. Carbon Sorbent tubes sold separately.
- Multiple battery options (rechargeable or AA batteries).
- Precise run time in minutes remaining.
- Intrinsically safe (CSA and ATEX Approval).
- Available in single-, 3- and 5-unit kits.
Technical Specifications
| Feature |
SP330 |
SP350 |
SP530 |
SP730 |
| Flow range (cc/min) |
20 to 3000 |
20 to 4000 |
20 to 3000 |
20 to 3000 |
| Smart Battery Management System |
• |
• |
• |
• |
| Choice of NiMH or AA-size battery packs |
• |
• |
• |
• |
| Internal battery charger |
• |
• |
• |
• |
| Keypad programming |
• |
• |
• |
• |
| Flow block detection and auto-restart |
• |
• |
• |
• |
| Intrinsically safe models available |
• |
• |
• |
• |
| Keypad lockout |
• |
• |
• |
• |
| Multiple lightweight configurations |
• |
• |
• |
• |
| Continuous flow mode |
• |
• |
• |
• |
| Constant pressure mode |
• |
• |
• |
|
| Internal low flow bypass |
|
|
|
• |
| Internal precision flowmeter |
|
|
• |
• |
| Continuous data logging of flowrate |
|
|
• |
• |
| Data logging of both high and low flow |
|
|
|
• |
| Intermittent sampling capability |
|
|
• |
• |
| TrakPro Data Analysis Software |
|
|
• |
• |
Applications
- Personal exposure monitoring/IH studies.
- Ambient/work area monitoring.
- Environmental sampling.
- Epidemiology health studies.
- Engineering studies.
Downloads 
|
|